Re: SUSStutter vs SUSMultiply

[andy butler <akbutler@tiscali.co.uk>]

Per Boysen wrote:
> Anyone up for explaining the difference between these?
ok Per, EDP speak

Firstly InsertMode=SUS

Now, when you use Multiply the Loop is cut to the length that you held 
the switch down.

then also do
Loop/Delay (or whatever it's called on Blackfaces, anyway it's the 
Interface Mode)=StU
This changes the way Insert works. Now the EDP will  find some audio 
from the loop to fill the Insert, instead of just inserting the new 
material that you are playing. So SUSInsert now becomes SUSStutter.

This is an "emergent artifact" from the Loop4 development, normally the 
EDP is counting cycles silently while the new material is inserted, but 
taking the audio from the position of that count is still possible, and 
has the (unexpected) result of running repeatedly through a section of 
audio which is one cycle long, starting from where Insert was pressed.

So for a short press ( when InsertMode=SUS) you get little stutters 
introduced into the loop.

Best thing is to set it up on an edp and try it.
(I'm pretty sure Mobius doesn't have this, unfortunately)

andy butler