Support
Looper's Delight
|
Support |
|
|
>> I'm checking out the Kaiserlooper here now but no audio gets >> looped. The "DSP Status" window shows the correct settings for my >> G5 and Multiface audio interface. I can monitor the Multiface >> separately and I can see that no audio is being piped from the >> software to the physical output. Should there be some graphic >> indication in Kaiserlooper on what's going on? On 27 aug 2006, at 00.00, Jeff Kaiser wrote: > > Hi Per, > > Awesome! somebody tried it....oh....and it didn't > work....hmmmm....bummer... :-) > There are three places you should see activity: > Is there any input level being shown on the LED under "input level?" > And is anything showing at the LEDs under the "Master Volume?" > Then, when you loop, there should be indication under the > particular loop strip that there is level there when you raise the > fader. > > Just curious, what is the CPU Usage reading under the on switch? > And maybe not so clear, play of the loop starts when you release > the record button > > Thanks, so much, Per! The CPU Usage meter does flicker between 2 and 3. Both in the main mixer window and the smaller "CPU Utilization" box of the DSP Status window. This is on a 2x2 GHz G5 with 2 GB ram. Still no signs of any activity inside the Kaiserlooper though. Greetings from Sweden Per Boysen www.boysen.se (Swedish) www.looproom.com (international) http://tinyurl.com/fauvm (podcast) http://www.myspace.com/looproom