Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: 2 Questions



Thanks for the info.........

Ideally, while my home stereo does work- my music room is seperate from the
living room, where the stereo is house, so I'm looking for a seperate
system. I might buy a cheap home stereo if that is the best option, but I
have got to believe there is a better amplification system for the Repeater
than a home stereo. That wil remain an aoption though, for sure. I've often
though about trying the digital output on the Repeater, but have never done
it- maybe I will give it a whirl tonight.

As far as the GT6-B, for now, I need to have it stay on the FX loops
because as you suspected, I use it a lot to affect the recorded loops- once
I have a MoFx this will probably change, but for now I need it where it is.
But that brings me to another question- currently, I AM already running the
main instrument (regardless of whether it is the synth or my bass) into the
back panel input on the Repeater, should I be running it into the
instrument input? Any suggestions on a cheap DI box that will work? And if
I *do* put a DI box between the instrument & Repeater, will I need to turn
it off when playing synth instead of bass?






                                                                           
                                                            
                                                                           
                                                            
             "Rainer Thelonius Balthasar       To: 
Loopers-Delight@loopers-delight.com                                        
         
             Straschill"                       cc:                         
                                                            
             <rs@moinlabs.de>                  Subject:  2 Questions       
                                                            
             04/03/2006 01:09 PM                                           
                                                            
             Please respond to                                             
                                                            
             Loopers-Delight                                               
                                                            
                                                                           
                                                            
                                                                           
                                                            




Matthew,

regarding question #1:
a) if your noise problem is greatly reduced when using the repeater with
your computer speakers in comparison to your guitar amp, I'd suggest that
the repeater/guitar amp combination is the problem, not the repeater per
se.
The noise mod might help you to get rid of some of that noise (i.e. the
noise you hear when using the computer speakers), but not of everything.
For
your home listening pleasure, I don't see any reason why working with your
stereo receiver would hurt. If the receiver has an S/PDIF input, you might
even connect your Repeater to that (and avoid noise from its analogue
output
stages).

b) would it be possible (from the way your playing/sound editing works) to
put the GT6-B before the Repeater, or would you be able to adapt to using
it
this way? There would be two advantages: first, you wouldn't have to use
the
Repeater's instrument input, which is one of its biggest noise sources.
Plus, any condition of your signal affecting the dynamics (for bass
players:
typically compression) would happen before the repeater, so the compressor
would not "pull up" the repeater's input noise at it is currently.
If you can't use the GT6-B before the Repeater (e.g. because you use it to
effect the recorded loops all the time), then using a small DI to connect
your bass to the rear input of the Repeater will help a little.

             Rainer

> #1- I am mainly a Repeater user. I am currently running a
> Roland RS-5 or my bass into the Repeater, then on the FX loop
> of the Repeater is a Boss GT6-B. Now, with this set up I
> can't  use my amp (GK Backline 250 into an Ampeg 2x10)
> without horrible noise issues. I know at least some of this
> is due to the Repeater's inherent noise problem, which I will
> resolve in due time with the mod offered by AudioPros. In the
> meantime, though, I have the output of the Repeater hooked to
> a small set of computer speakers, which seem to output the
> loops without the same amount of background noise- but of
> course, being computer speakers, they don't reproduce bass or
> any kind of drum very well. So essentially, I am just looking
> for *the best way to monitor my Repeater's output at home in
> my music room*. I am open to all options people think might
> work- would a small PA do the trick? a power amp & set of
> monitors? A home stereo receiver & speakers ( I hooked up the
> Repeater tomy stereo & it sounded great)? Any help would be
> greatly appreciated, I'm going deaf from working on
> headphones constantly. : )






---------------------------------------------------------------------------
This e-mail message (including attachments, if any) is intended for the use
of the individual or entity to which it is addressed and may contain
information that is privileged, proprietary , confidential and exempt from
disclosure.  If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this communication is
strictly prohibited.  If you have received this communication in error,
please notify the sender and erase this e-mail message immediately.
---------------------------------------------------------------------------