Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP FCB

I thought there was a Windows only editor for the FCB?

TravisH

On 10/20/05, Kris Hartung-2 <khartung@cableone.net> wrote:
> Well, I was partially joking, but the unit is not the most intuitive, and
> having been a professional technical writer in the past, the manual has 
>much
> to be desired.  Suffice it to say that I've had a much easier time
> programming other similar units.  My main problems were around the unit
> sending other messages to the EDPs, which were causing them to behave. 
>So I
> had to basically go through and inspect every setting to ensure that it 
>was
> sending nothing but notes to the EDPs, etc. It would be nice to have an 
>LED
> or a way to program the unit graphically via the PC.
>
> Kris
>
> ----- Original Message -----
> From: "Adrian Bartholomew" <adrian@bartholomusic.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Thursday, October 20, 2005 10:38 AM
> Subject: Re: EDP FCB
>
>
> > David. its really very simple.
> > i have no idea why he wouldve said this. i have it and its a breeze.
> > the manual it comes with explains everything. any difficulties let me
> > know specifically.
> >
> > 1 thing though. u may need to reinitialize otherwise the continuous
> > controller pedals dont work properly
> >
> > On Oct 19, 2005, at 9:22 PM, Kris Hartung wrote:
> >
> > > Good grief....buy yourself a fifth of hard alcohol or a 12-pack of
> > > Guiness
> > > beforehand...you'll need it. :) I barely survived, and now I'm back
> > > to the
> > > EDP contoller because it has a smaller footprint. But I am using
> > > the FCB for
> > > Mobius with success.
> > >
> > > Kris
> > >
> > > ----- Original Message -----
> > > From: ".David.Auker." <DaVAuk@Hevanet.com>
> > > To: <Loopers-Delight@loopers-delight.com>
> > > Sent: Wednesday, October 19, 2005 8:11 PM
> > > Subject: EDP FCB
> > >
> > >
> > >
> > >> I'm about to wade into setting up the FCB1010 to control the
> > >> Echoplex.
> > >> I've searched the archives a little, and found discussion...I'm
> > >> wondering if someone could point out a good source, something
> > >> definitive, something basic.  There has to be a "jackpot"
> > >> somewhere in
> > >> the archives -- is there a summary at an easily-found source?
> > >>
> > >> Thanks,
> > >> David (currently using FCB with Repeater)
> > >>
> > >>
> > >>
> > >
> > >
> > >
> >
> >
>
>
>