] [Thread Prev
Re: Programming Rocktron All Access - HELP!!!!
Jeff Larson wrote:
> You must have Source# set to 36.
> The programming for Substitute is surprising. You're using the
> virtual Substitute button with a momentary switch but sending non-zero
> on both the down and up transitions. The effect will be a sustained
> Substitute, but to the EDP it looks like two long presses of the
> non-sustain Substitute. If want you want is SUSSubstitute, then
> the "correct" programming would be CC# 58 with On/Off 1/0.
Apparently I wanted SUSSubstitute...because it now behaves "correctly."
> The programming for Undo has the same problem. I don't see how this
> can work, you're effectively performing two long presses of the
> virtual Undo button every time you tap the switch. At the very least,
> I would expect you to be undoing two layers at a time instead of just
> one but maybe the EDP is smart enough to ignore the second long press
> if the first one is still active.
> Again, On/Off should be 1/0, the CC# is ok. If what you want
> is to always perform a LongUndo without having to hold the switch
> down, then use CC# 67 instead.
Well, somehow it worked...but LongUndo is what I really wanted.
Thanks for debugging my rig!!!