] [Thread Prev
Re: Programming Rocktron All Access - HELP!!!!
Really? It seemed like there were alot of All Access posts in the archives.
I do have a FCB1010 here which is what the All Access replaced for my
rig. While I am still hoping to dial in the All Acess, it would not be a
deal to use the FCB1010 for just the echoplexs.
A question... how viable is the FCB1010 with the echoplex? I didn't think
handled enough control numbers/notes to be useful.
Thanks for the fast reponses!!!
Craigon 9/17/05 11:45 AM, Luis Angulo at firstname.lastname@example.org wrote:
> There is a fellow looper called Glen Poorman who can
> help you out,i believe he uses it
> cheers and good luck
> --- Craig Mitchell <email@example.com> wrote:
>> I'm new to the list and searched the archive but
>> have not yet found the
>> answers to questions.
>> I am running two Echoplex Pros (loop IV)and trying
>> to control them with a
>> Rocktron All Access Pedal. I have made progress but
>> a few things are still
>> not working quite right.
>> I have a good understanding of MIDI and how to
>> program the Rocktron All
>> Access but success so far as eluded me on this one.
>> First off, the Echoplexes are sync'd up with a TRS
>> cable via brother sync
>> and the master has a midi cable going to the slave.
>> How are people programming the All Access? Are you
>> using Control Numbers via
>> Instant Access switches? Or are you using Note
>> ON/OFF via the Custom
>> settings for presets?
>> I have tried both and am still getting mixed
>> With the Echoplexes set to 'Controlsource=CNTR' I
>> have been using the
>> Instant Access switches to trigger various
>> Record - This works but sometimes when I press the
>> button it starts
>> recording a clears right away. A second press gets
>> it recording properly and
>> I can loop.
>> Mute - works fine
>> Halfspeed - works fine
>> Clear - This one does not seem to work at all. I
>> have tried a couple
>> different ideas to no avail.
>> However, if I press the mute switch, the clear
>> switch, and then the mute
>> switch again it clears???? Something is not quite
>> right there. I must be
>> close. :)
>> Soooo... any help is greatly appreciated! Are you
>> using Latching, Momentaty,
>> Hold on the All Access Instant access switches.
>> Can one replicate the Echoplex pedalboard function
>> of holding down the
>> record button and clearing the loop with the All
>> Access via midi?
>> A step by step guide from someone who has this
>> dialed in would be fantastic.
> Yahoo! Mail - PC Magazine Editors' Choice 2005