[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Programming Rocktron All Access - HELP!!!!

Hi Craig,
I borrowed the Rocktron all access to control the EDP
for a few days to do a gig but wasnt impressed at
all,one of the things that turned me right off was the
clancky and lound switches,i would recomend you the
behringer FCB1010,nice and quite switches,a bit more
user friendlier plus the integrated exp. pedals and
almost 4 times cheaper!
good luck

--- Craig Mitchell <camitchell@cfl.rr.com> wrote:

> Hi,
> I'm new to the list and searched the archive but
> have not yet found the
> answers to questions.
> I am running two Echoplex Pros (loop IV)and trying
> to control them with a
> Rocktron All Access Pedal. I have made progress but
> a few things are still
> not working quite right.
> I have a good understanding of MIDI and how to
> program the Rocktron All
> Access but success so far as eluded me on this one.
> First off, the Echoplexes are sync'd up with a TRS
> cable via brother sync
> and the master has a midi cable going to the slave.
> How are people programming the All Access? Are you
> using Control Numbers via
> Instant Access switches? Or are you using Note
> ON/OFF via the Custom
> settings for presets?
> I have tried both and am still getting mixed
> results.
> With the Echoplexes set to 'Controlsource=CNTR' I
> have been using the
> Instant Access switches to trigger various
> functions.
> Record - This works but sometimes when I press the
> button it starts
> recording a clears right away. A second press gets
> it recording properly and
> I can loop.
> Mute - works fine
> Halfspeed - works fine
> Clear - This one does not seem to work at all. I
> have tried a couple
> different ideas to no avail.
> However, if I press the mute switch, the clear
> switch, and then the mute
> switch again it clears???? Something is not quite
> right there. I must be
> close. :)
> Soooo... any help is greatly appreciated! Are you
> using Latching, Momentaty,
> Hold on the All Access Instant access switches.
> Can one replicate the Echoplex pedalboard function
> of holding down the
> record button and clearing the loop with the All
> Access via midi?
> A step by step guide from someone who has this
> dialed in would be fantastic.
> Thanks!
> Craig


Yahoo! Mail - PC Magazine Editors' Choice 2005