] [Thread Prev
Re: behringer controllerRe: EDP pedals
Yes brother i ended up doing the same thing, the
repeater has a lot of misteries i havent been able to
solve.Sometimes i set up the channels in stereo and
when i want to deactivate them i won´t do it.Other
times the pitch function goes crazy and my loops start
in double speed...
say Per going back to the RME; i always found that
plugging directly into the card there wasn´t enough
gain and thats why i got the sm pro pr-8 mic preamp
for it but i still have to turn the gain on the mic
preamp all the way up to get a decent signal into the
PC.I am told that it might be because i dont have
stereo cables going from the RME into the mixer.Is
this the case with your card s well?
--- Per Boysen <email@example.com> wrote:
> On Sep 17, 2004, at 15:37, Jason Spring wrote:
> >> Hi Phill,
> >> Your setup is interesting!
> >> is it possible to send a program change and a cc
> >> simultaneously to the repeater so when you press
> >> buttons it will call trc1---trc2---trc3---trc4
> and go
> >> into record mode respectively?
> > I'm beating Phil to the punch and answering your
> question: Yes! you
> > most certainly CAN send pc messages along with cc
> messages (and even a
> > note message) all with a single press. You can
> actually send 5 pc
> > messages and toggle between two cc messages/values
> with each button.
> I tried that with the Repeater and found that the
> Repeater can not
> always handle such a incoming "multi command". I
> experimented quite a
> lot but never found any rules. Some combinations
> were excepted by the
> Repeater and some were not. It seemed that the
> Repeater's "listening
> capability" is in someway dependent on the status of
> different tracks.
> Like if I had panned or transposed certain tracks
> lately. I ended up
> playing it all safe by using very few multi command
> buttons in my
> FCB1010 bank for the Repeater.
> All the best
> Per Boysen
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!