Re: EDP w/PMC-10

[Kim Flint <kflint@loopers-delight.com>]

sounds to me like it isn't really sending the note-off message. Maybe you 
have a typo in the PMC-10 programming? Or maybe you have a flaky switch on 
the PMC-10?
kim

At 10:01 PM 5/11/2004, hazard factor wrote:
>I have many of the major functions of the EDP up and running. My problem 
>is
>triggering record. I am using note #38, velocity 64, momentary switch..on
>release of the switch, it sends velocity 0. This works fine, mostly.
>Sometimes, when I hit record, it is almost like a double press...it 
>records
>.4 seconds and then resets. I press record again, and it then works fine.
>After I am done with that loop, hit record to start another, and it 
>repeats
>the resetting. After that, it is fine. This only happens when sending midi
>messages- not with the front panel or with the EFC-7.



______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com