Found one here:
I made an assumption about the rated power (1/8W) - are you able to verify
this from e.g. a schematic?
Nic
----- Original Message -----
Sent: Sunday, August 31, 2003 7:05
AM
Subject: Re: HELP!!! Echoplex footswitch
part number?
on 8/31/03 3:14 AM, Kim Flint at kflint@loopers-delight.com
wrote:
> sorry, I think I gave the wrong part# once and it's in the
archives.
>
> The footswitch part# is:
>
> 10PA005
at http://www.mouser.com
>
>
or
>
> 106112 at http://www.jameco.com
>
> the
switch is made by a company called Mountain Switch, and their part# is
>
DS412R.
Thank you Kim!!
One other stupid question I have
regarding electronics. Upon inspecting the
inside of the EFC-7, one
of the resistors in the footswitch is broken so I
need to replace it (Next
Loop - 681 ohms). Can someone please point me in
the right
direction to locate the 1% metal film resistors in the
mouser
catalog? Sorry for being such an idiot in these matters, I
don't have an
electronics background and the catalog is intimidating.
I just want to make
sure I get the right part ordered when I return the
other switches. Any
help will be much appreciated.
Thanks
again in advance!
Ed
