Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Echoplex w/drum machine question



> > (I have quantize on and set to LOP, 8th cycle is
> > set to 8, and sync is set to out, switch quant is
> > off. I set the tempo to 140.) If I need to change 
> > any of these settings let me know.
 
> I'm not sure I understand exactly what you want to
> do, but did you try with switch quant set to some 
> value?

Hi Per,

Thanks for trying to help me out.
No I haven't tried setting the switch quant to some
value. What value should I set it for?
  
> > I tried setting the half speed button to a
> > parameter with double the value of everything else

> > and it did keep the drum machine at the same speed

> > when I hit half speed but, If I hit half speed 
> > again later to return it to normal speed, the drum
> > machine doubles it's speed. 
> 
> To use this workaround you need to program two
> different foot switch commands:
> 
> 1) HalfSpeed/PC with 16 8th/cycle
> 2) FullSpeed/PC with  8 8th/cycle 
> You can not use the "speedbutton" command. 

I will try that.  

> >It is also out of sync. 
 
> ...switch quant?  ;-)

I have this set to off. What sure it be set to?
 
> > Are any of you out there able to use all of the
> > functions in the echoplex and keep a drum machine
> > going steady and in time for 10 minutes without
> > drifting, and without going schizoid when you hit
> > any button besides overdub?
> 
> If that's what you want it might be a good idea to
> put the drum machine as master and slaving the EDP?

I've tried using the echoplex as a master and slave
and had similar problems. 

> But then, this thread has been all about using the 
> EDP as master with a slaved drum machine, or am I 
 >mistakenhere?

I don't really care which is the master or slave as
long as it works and stays in sync. Which way stays in
sync best?

Ideally it would be nice to be able to start a song
I'd programmed on the drum machine with a four count
countoff, then hit record on the echoplex and start
recoring along with the drum machine right away. Then
I'd like to be able to use the echoplex as I normally
would and it stay in synce with the drum machine even
if I played for 45 minutes which I frequently do. 

All the very best!
Terry
 
> All the best
> 
> Per Boysen
> 

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com