] [Thread Prev
RE: EDP Loop3 problem - '000' displayed when tap RECORD
Ah, merci Claude !
You must be practicing withcraft, as yes indeed my Threshold had got itself
set to 6 somehow ( probably happened when I was pressing buttons on the EDP
while simultaneously learning more about the letter 'T' from Sesame Street
I've changed threshold to 0 now, all is well. Will keep the factory reset
bad ju-ju for non self-inflicted mishaps, thanks for passing it on.
Hope the weather is fair,
From: Claude Voit
Sent: 9/28/02 1:09 PM
Subject: Re: EDP Loop3 problem - '000' displayed when tap RECORD
you changed the thresh params by error so its waiting for you, a second
loop means i dont want to wait do it now
to reset power the edp with the params button pressed
hop this helps
----- Original Message -----
From: "Andrew Taylor" <Andrew@bocs.com>
Sent: Saturday, September 28, 2002 1:37 PM
Subject: EDP Loop3 problem - '000' displayed when tap RECORD
> Hope someone can help !
> My EDP seems to have got a ghostly midi sync inside. Recently I was
> synced up to various devices, and it was working fine. All MIDI
> disconnected from the EDP, but...
> Problem is when I now tap RECORD three 000's are displayed and it
> into record until I tap record *again*.
> As a test, I connected the old Alesis HR16 up, it's displaying the
> dot' but ignores any kind of sync.
> I've got Quantize OFF, Sync OFF etc.
> What ails it atall ? I'd do a factory default to try and to exorcize
> there's no mention in the manual of such a thng and the parish priest
> Much obliged,