] [Thread Prev
Re: TC Electronic D-Two (was Re: D-Two Looper Settings)
I have the D2. It has bypass mode setting that lets you choose whether the
bypass occurs before the delay or after. It also lets you choose whether
bypass applies to the wet and dry signal, or only the dry signal. The
correct combination of bypass settings provides a tape loop that is easy to
punch into and out of using a momentary floor switch. Add a momentary
switch becomes a very good tape loop device. One cool thing is it lets you
set a threshold, above which the delayed sound is played backwards. It also
has separate tap mode.
----- Original Message -----
From: "Greg S" <firstname.lastname@example.org>
To: "Loopers Delight" <Loopers-Delight@loopers-delight.com>
Sent: Tuesday, July 23, 2002 6:40 PM
Subject: FA: TC Electronic D-Two (was Re: D-Two Looper Settings)
> Sorry that my only post in a few months is a blatant ebay item, but it
> Also, if an LD subscriber wins the bid, I'll give them an 8% discount for
> putting up with my spam.
> Reserve is $290, Buy it now is $330.
> > > 5 sec stereo; 10 sec mono. You are right.
> > >
> > > "Overdubbing" is not quite the right concept with the D-2 b/c it's
> > > really a true looper.
> > ...
> > >
> > > It really is a great box. I'm not sure it's a "looper" though
> > from http://www.loopers-delight.com/tools/tools.html:
> > Current Real-Time Loopers
> > at the minimum, a Real-Time Looper must be able to sample audio and
> > it on the fly, and allow the user to sample new material while the
> > current loop is playing. Usually they do much more. These are live,
> > performance-oriented looping instruments....
> > Sounds like a looper to me ;)