Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Using the Behringer FCB1010 midi controller w/ echoplex



At 04:17 PM 7/21/2002, JIMFOWLER@prodigy.net wrote:
> >
> >Here is how I have the echoplex midi set up (is this
>correct?):
> >
> >channel = *1
> >
> >control source + not
>
>try using cont instead of not

the Behringer pedal is not capable of controlling the Echoplex very well 
(or at all) with it's simple continuous controller implementation. only 
the 
Note implementation would work.


> >source # = 36
> >
> >vol cont = 7
> >
> >feedback control = 1
>
>check page 11 of the fcb manual and make sure "note"
>is selected.  i think using control changes might be a
>touch easier.  that's what i use with my all access
>and it's a breeze to configure.

i don't understand what the difference would be. From the echoplex point 
of 
view, it works exactly the same whether you use notes or cc.

kim



______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com