Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Midi Clock



OMG- this sounds so cool- I must try these ideas- here is a quote from LD
website- Thanks Kim.

"Tap Tempo with BeatSync

An interesting use of the BeatSync jack is as a means of setting loop
lengths that match a tempo. Just plug a momentary switch type of pedal in
the BeatSync jack. Set the Sync parameter to In. Tap the beat on the pedal.
You will see one of the green Sync LED's flash each time you tap. Press
Record to start recording the loop. The Echoplex will wait for the next 
beat
tap and then start recording. Continue tapping your beat. When you are done
recording, press the Record button again just prior to the last beat. When
you tap the last beat, the Echoplex will stop recording at that point. This
allows you to exactly match loops of variable length to the tempo you are
playing.

In a similar fashion, you can get tempo for your loops by plugging tempo
sources into the BeatSync jack like audio click tracks, the headphone out 
of
an electronic metronome, drum machine outputs, or triggers on an acoustic
drum."


----- Original Message -----
From: "Kim Flint" <kflint@loopers-delight.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Wednesday, September 12, 2001 11:13 AM
Subject: Re: Midi Clock


> well, you could use the echoplex, it makes a nice midi clock out from tap
> tempo. I'm sure there are others that do the same. I also use an old
alesis
> drum machine, because I can set the tempo of the clock with a slider, the
> up/down buttons, or the numeric keypad on it. I has a nice back lit
display
> to show the tempo and generates a nice clock. no tap tempo on the alesis
> though.
> kim
>
> At 08:52 AM 9/12/2001, M. Steven Ginn wrote:
> >Since the accuracy of Midi Clock/Timing seems very important for
> >looping, is there a recommended piece of equipment and/or method to
> >establish proper timing and tap tempo for a rig so that all delays,
> >looping, effects, etc. are in sync?
> >
> >Steve
>
> ______________________________________________________________________
> Kim Flint                     | Looper's Delight
> kflint@loopers-delight.com    | http://www.loopers-delight.com
>