[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Stereo EDP/footswich problem

Just wanted to thank Kim and Dennis for their responses.

I did a factory reset on both machines and tried a different EFC-7 f./s
cable - all is working again.  Interesting enough, the original cable tests
fine on my voltmeter.

Many thanks again for your user suppport.


"If you're going to do something tonight that you'll be sorry for tomorrow
morning,....sleep late."
                   -- Henny Youngman
----- Original Message -----
From: "Kim Flint" <kflint@loopers-delight.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Wednesday, August 15, 2001 2:15 PM
Subject: Re: Stereo EDP/footswich problem

> also, you might want to check that you didn't leave it in delay mode or
> something like that. (or just reset all the parameters to default to make
> sure it is in a normal state.)
> or it could be the pedal or pedal jack jack has developed a short. that
> would act like the Record button was permanently pushed.
> kim
> At 09:50 AM 8/15/2001, SoundFNR@aol.com wrote:
> > > It now seems that my EDP master WILL NOT come out of REC mode - the
> > previous
> > >  slave works fine with the f/s.
> >When I had a problem like this it
> >was because I'd put the attached footswitch
> >to one side, upside down. So some of the
> >switches were permanently on.
> >
> >
> ______________________________________________________________________
> Kim Flint                     | Looper's Delight
> kflint@loopers-delight.com    | http://www.loopers-delight.com